Critical Power Management System. Whether it is just a generator or transfer switch, a single facility or multiple locations: PowerQuest, the Critical Power Management System (CPMS) gives you the visibility and insight needed to achieve you goals.
Automatically Supervise ATS Transfers to the Emergency Sources. When real-time demand exceeds generator capacity, loads must be connected or disconnected according to load priority to avoid generator overload. ASCO’s 5800 SERIES Load Management Units automatically supervise ATS transfers to the emergency source according to assigned priorities. These units optimize capacity usage while avoiding overload.
Consolidates Annunciators for up to 8 Devices into a Single, Wall-Mountable Touch-Screen Interface. Managing critical power equipment can be challenging. Multiple annunciators utilize different interfaces. Generators and transfer switches require local operation for testing. Compliance requires manual data collection and labor-intensive reporting.
Centralized Monitoring of Critical Power Equipment. The ASCO 5701 8-Device Gateway provides centralized monitoring of critical power equipment through a facility's Transfer Switch. The 5701 Gateway connects directly to a facility's generator, transfer switch, load bank, surge monitoring system, and other equipment. From this central point of access, users can securely view web pages and initiate transfer tests.
A Revenue-grade Energy Meter with Advanced Power Quality Analytics. The ASCO Power Quality Meter helps reduce energy costs while increasing reliability and decreasing infrastructure cost.
Remote Transfer Switch Interface Control of a Single Switch. The ASCO 5350 Remote Annunciator is a remote transfer switch interface for LED indication and control of a single transfer switch. Ethernet technology is incorporated for fast reliable communications. Multiple annunciators overseeing the same transfer switch can be placed in different locations, allowing redundant, distributed monitoring and control.
Status and Control for up to Eight Transfer Switches. The ASCO 5350 Remote Annunciator (RA) is a stand-alone, industrial grade interface device providing transfer switch status indication and transfer/retransfer control for up to eight transfer switches. Ethernet technology is incorporated for fast, reliable communication.
Premium User Interface for Monitoring and Controlling ASCO Switches. The Touch Display Interface (TDI) is a premium user interface for monitoring and controlling your transfer switch. It increases power reliability, compliance, and efficiency by presenting the most essential information using intuitive graphics and real-time data.
Collects Real-time Single or Three-phase Power Information. The ASCO Power Manager XP, Catalog No. 5220, collects real-time single or three-phase power information for engine-generators, utility, paralleling switchgear and automatic transfer switches.
Providing Deeper Transparency into the Workings of an Electrical Circuit. The 5210 Digital Power Meter (DPM) is ASCO’s standard solution for providing deeper transparency into the happenings in an electrical circuit.
Remotely Monitor and Control ASCO Transfer Switches. The ASCO Connectivity Module, Catalog No. 5150 (Acc. 72E), provides easy and reliable Ethernet connectivity to ASCO transfer switches for monitoring.
Remotely Monitor and Control ASCO Transfer Switches. The ASCO Quad-Ethernet Module, Catalog No. 5140 (Acc. 72EE), provides connectivity from ASCO equipment and Ethernet switch functionality.
Remotely Monitor and Control ASCO Transfer Switches. The ASCO 5170 Quad-Ethernet Module is the optimal path to remotely monitor, control and connect to your ASCO Power Transfer Switches.
Monitor Back-up Generator Start Signals and Prevent Outages. An NEC®-compliant engine-generator starts automatically when it receives a start signal from an automatic transfer switch. If signaling wires are damaged, an engine will not receive the start signal needed to begin supplying mission-critical power. Without Engine Start Circuit monitoring and control, facility operators will never know when wiring is compromised, placing the facility at risk for an outage.
Facility Power Management in a Box. Centralizes power testing, monitoring and reporting, while delivering aggregated power information to facility monitoring systems via standard open protocols.
Remotely Monitor and Control ASCO Transfer Switches. The ASCO CPMS Connectivity Units, Catalog No. 5150 (Acc. 72E) converts data from power devices to Ethernet and provides connectivity between power devices and the CPMS platform.
Standard and Custom Lighting Solutions for Area and Security Applications. Our line of standard and custom lighting control panels are designed to meet all lighting control application needs. ASCO 641 Lighting Control Panels are designed for automatic and manual on/off control of parking lot lighting, signs, building exterior lights, security lighting, interior safety lighting, and recreational lighting areas.
Remotely-Controlled Feeder Disconnect. The ASCO 911 single-throw mechanically-held remote control switch is used for remotely-controlled feeder disconnect applications such as bulk load control and energy management.
Reliable Lighting Control. The ASCO 918 provides reliable and convenient lighting control in numerous applications, including enhanced performance for high inrush current loads such as High Intensity Discharge (HID) and metal halide lighting.
Feeder Circuit Lighting Control. Easy to use and quick to install, ASCO 920 Lighting Contactors for Feeder Circuits feature all-position mounting, no derating for high inrush loads and a reliable single-solenoid operator. They can be used with energy management systems which automatically control lighting and power circuits.
All-Purpose Remote Control Switch Designed For Double-Throw Capability And Load Control. Prevent two loads from being simultaneously connected to a single power source with an ASCO 175. These double-throw mechanically-held remote control switches are used in applications requiring one or another load to be supplied from a common source.
Gas Flow Control Panel | 120V 60Hz Input | 80VDC Output 0.8A. Valued for silent, highly reliable operation, the ASCO 108D10C gas flow control panel operates on standard 120V 60Hz input, with an 80VDC output at 0.8A maximum, making it suitable for control of a wide range of DC solenoid valves controlling gas flow to school kitchens, domestic cooking classes, ceramic and metal shops.
108D90C AC Relay Panel | 120V 60Hz | 24 VAC, 24 VDC, 208 VAC, and 240 VAC. The ASCO 108D90C gas flow control panel operates on 120V 60Hz input, but with 120/60VAC output for control of AC valves more commonly used in heavier duty applications. This model features a key-operated switch with manual “on” and “off” buttons directly on the cover.
Cut Gas Flow to 108D10C and 108D90C. Cut off gas flow in less than 0.1 seconds with an ASCO 173A19 Emergency Stop Station featuring a momentary push button. Install these in multiple stations located around the facility or classroom for safety and emergency purposes. Applicable to both 108D10C and 108D90C.
Open and Cut Gas Flow. The normally-closed pushbutton of the ASCO 216C89 Master Control Station cuts off gas flow when pressed. A key operated, normally-open switch restores gas flow. One Master Control Station is required for each 108D10C panel installation. Not required for or applicable to 108D90C.