Accessory 105B adds special fusing and wiring for a Briggs & Stratton generator.   Similar to 105G except wired to the 14A contact instead of the NR relay.  This accessory is limited to 10 amps @ 240V and wired for single phase only.

There are two ways to do transfer test using the ATS with acc. 105B:

1) If using the ATS Transfer Test Button:

*  Turn on the generator manually

*  Press the transfer test button on the ATS

2) If simulating normal power outage:

*  Turn off the Normal power source using the disconnect switch or circuit breaker supplying the normal power source

Published for:ASCO Power Technologies USA