The exerciser can be set using the built-in engine exerciser of the generator itself if the Series 185 has acc. 105B.

Acc. 105B is special fusing and wiring for a Briggs & Stratton generator.  This is somewhat similar in acc. 105G except that this is wired to the 14A contact of the ATS mechanism instead of the NR relay of the ATS controller. The ATS will only signal the generator to start during the loss of primary/normal power or when the auxiliary contact 14A is open.

The customer can contact Briggs and Stratton to ask how to set the engine exerciser using the built-in engine exerciser of the generator . (see the link below for Briggs and Stratton Generator's technical information)
https://www.briggsandstratton.com/na/en_us/support/faqs/browse/home-generator-quick-start-guide.html

Below shows a sample wiring diagram and details of the ATS with acc. 105B for reference only. (For the actual wiring diagram, refer to the label that is mounted on the ATS)

SAMPLE SWITCH:
SN: 2259002 - 003 RE
BOM: 1172041
CAT: D00185A30200F1XF,45BS,105B

Published for:ASCO Power Technologies USA