The lube kit for the G and S Frames is given by the following kit number:

920836 LUBRICATION KIT G & S DESIGN   ATS/ATB

The kit contains four types of lubricants as described in the following table. An instruction manual that shows the detailed location of the lubrication points is also enclosed with the kit.

No lubrication is required for units that are operating properly under normal conditions. Duplication of factory lubrication shall be performed only during repair or parts replacement, or when the switch is subjected to severe or abnormal operating conditions.

Location	Lubricant
Solenoid Core – tube, spring and link	451980-001 MOLYBDENUM DISULFIDE MIX LUBRICANT, 20 GRAM CONTAINER DYNALOY 720260
Rod end bearings, shafts and pins, needle bearings, ball bearings, bushings, cam followers	075271 LUBRICANT #44 DOW CORNING GREASE, 5.3 oz TUBE
Moveable and Stationary contact pivot	263300 LUBE,DYNALOY #495-1,10 GM SILVER LUBE (conductive lubricant)
Primary connector	890138-001 LUBRICANT, MOBILTEMP SHC 32 GREASE  12.5 OZ. TUBE (high temperature grease)

The lubrication kit can be ordered from the ASCO Parts Department. They can be reached at parts@ascopower.com or at 1.800.800.2726(ASCO) and follow the voice prompt to select the Parts Department.

Published for:ASCO Power Technologies USA