Changing the unit from non-automatic to automatic or vice versa will involve the following major modifications:

1. Reconfiguration of the controller's factory settings

2a. Wiring of the engine-start signals from the controller to the field-side terminals for non-automatic to automatic conversion
2b. Removal of the engine-start signal wiring for automatic to non-automatic conversion

3. Change of labels

For these reasons, the conversion needs to be done by ASCO Power Services or their authorized representative. To set up a conversion request with ASCO Services, contact the local ASCO office or dial the ASCO Hotline at 1.800.800.ASCO(2726) or send an email to customercare@ascopower.com.

Published for:ASCO Power Technologies USA