Search FAQs
How to set-up ASCO 5300 Remote Annunciator’s Network parameters?
Power Requirement:
1. For initial configuration, directly connect the annunciator to the computer using Ethernet cable.
2. Log in to the built-in web interface
3. On the left pane, under Configurations, click Annunciator to configure the ATS Remote Annunciator.
4. Annunciator should be set with the same Network parameters with the ATS that will be connected to it.
5. Click Update to save settings.
Refer to this link for the installation manual:
https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=asc-pcm-um-5350.pdf&p_Doc_Ref=PCM-UM-5350ATSRA
1. For initial configuration, directly connect the annunciator to the computer using Ethernet cable.
2. Log in to the built-in web interface
- Open a web browser and in the address bar, type in the default address http://169.254.1.200
- Refer to manual 381333-315 for details of the log in credentials
- Recommended to change password
3. On the left pane, under Configurations, click Annunciator to configure the ATS Remote Annunciator.
4. Annunciator should be set with the same Network parameters with the ATS that will be connected to it.
5. Click Update to save settings.
Refer to this link for the installation manual:
https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=asc-pcm-um-5350.pdf&p_Doc_Ref=PCM-UM-5350ATSRA
Published for:ASCO Power Technologies USA
Explore more
Range:
Explore more
Range:
